Skip to main content

Operation

First time operation

Power ON procedure

A reboot of the Meteor is required to change certain settings. Don't worry if the Meteor reboots after changing settings and clicking on "Save". 

  1. Attach the supplied antenna securely to the RF connector. Using only 2 fingers screw on the provided antenna on the RP-SMA antenna connector (3). Stop screwing once the antenna is flush with the enclosure.

  2. Press briefly the Power button, wait 5 seconds. The indicator LED lights up and the Meteor is now ON.

  3. Connect to the device via Bluetooth 5.0 using the supported Meshtastic app.

  4. Click on "Set your region according to your location. Once a region selected, the device will reboot to apply the change.region"
  5. Wait for the device to applySelect the region settingmatching your approximate location
  6. Select the radio preset that you want to use and click on "Save" at the very bottom of the page. More details about radio presets here: meshtastic.org/docs/configuration/radio/lora
  7.  Under "Device configuration > User" set the short and long name of your node. Those names are displayed to other Meshtastic users and is used as an identifier.
  8. Finally under "Device configuration > Bluetooth" set a custom Bluetooth PIN for your Meteor.

Default Bluetooth password: 123456

3. Screenshot_20260129-164705.png 4.Screenshot_20260129-164724.png 5.Screenshot_20260129-164733.png

6. Screenshot_20260129-164743.png 7.Screenshot_20260129-170122.png 8.Screenshot_20260129-170150.png

  1. Check signal quality and GPS lock before field use.

  2. To switch off, hold the Power button for min.5 seconds and wait until the LED turns off.


Back to top